Independent connection of the washing machine. Connecting a washing machine to water supply and sewerage - detailed instructions and several methods Connecting a washing machine

Without the use of modern electrical appliances, it is extremely difficult to ensure a comfortable and cozy stay. For this reason, air conditioners, dishwashers, convectors and other devices that make life easier have confidently entered our lives. But perhaps the most popular household appliances is an automatic washing machine. This is due to the fact that the washing machine reduces manual labor. After purchasing the much-desired equipment, you should figure out how to connect the washing machine yourself. In this article we will offer you instructions on how to self-installation this unit. We will divide all the work into several successive stages.

Preparation is the path to success

Before connecting the automatic machine, you need to carry out several important preparatory work. First you need to choose the ideal location for this equipment. In principle, its installation can be carried out in any room, but mainly it finds its place in the bathroom or kitchen. When choosing a location for it, several important factors should be taken into account:

What is the distance from the nearest utilities. We pay attention to electrical wiring, sewerage and water supply. It is to these communications that the washing machine will connect.
Will it spoil or decorate the appearance of the room?
Is there a flat surface in the selected location?
Will it be convenient to use?

Having considered all the nuances, we proceed to the next stage of preparation - dismantling the transport parts. This is an extremely important step, because if you ignore it, then when starting up, important components of the machine will fail, and you will not have time to do even one wash. As a rule, it is necessary to remove the transport bolts, wooden beams and staples. The dismantling process should be carried out carefully so as not to damage appearance unit. To avoid mistakes, you should once again read the included instructions from the manufacturer.

Well, the last point of preparation is choosing a flat place with good coverage. The floor surface should be:

durable;
flat horizontal;
resistant to aggressive operating conditions.

If the selected surface does not meet these parameters, then it is important to carry out preparatory work. For example, you can make a new cement-sand screed, lay tiles and the like. The most important thing is that the surface is perfectly flat; check the horizontal level.

Detailed description of the installation process

After all the preparatory work has been completed, you can begin the actual installation of the machine. To do this you need to have a building level. The top cover of the machine is used to check the evenness of the installation. The maximum permissible deviation angle is 2°. The horizontal position is adjusted very simply: to do this, you need to adjust the legs of the unit.

It is prohibited to level the machine by placing objects under the legs! The only thing allowed is a rubber mat. It can serve as a protective element on a sliding surface.

When the machine is level, the legs must be firmly fixed. To do this, tighten the locknuts counterclockwise with a wrench. If you want the installation procedure washing machine was carried out technologically correctly, the following recommendations must be followed:

The unit will be installed securely, the legs will be firmly fixed, and the floor will be level.
To fasten supporting structures, it is necessary to use fixing elements.
To check the correct installation, you need to rock the machine diagonally. If there is no hesitation, then the work was completed at “A+”. Otherwise, adjustment will be required.

You should know how to properly connect a washing machine to the water supply. Drinking water is a responsible event. For this purpose, the manufacturer has provided a special flexible hose, as well as special fittings. In some cases, the hose length may simply not be enough. What to do in such a situation? There are two solutions:

Purchase a longer rubber hose.
Perform permanent installation.

In the first case, the task is quite simple. You just need to connect the product through a hose from the collection point to the connection on the washing machine. Make sure there is a rubber seal on both sides of the hose. Otherwise, water leakage will occur.

When connecting a hose, three important requirements must be met: firstly, it is unacceptable to lay the hose in a place where there is a risk of mechanical damage. The hose can be placed, for example, under a bathtub; secondly, stretching the hose is not allowed. During operation of the unit, deformation may occur due to vibration of the machine; thirdly, the pipeline must provide a tight and reliable connection.

If you follow these simple rules, then further operation will not cause any problems.

As for the second option for connecting the machine - stationary, you will have to work harder here. To implement this plan, you will need to use metal or polypropylene pipes. But it is immediately worth noting that as a result of using steel pipes for this purpose, clogging of important components may occur due to rust particles. It is better to opt for plastic pipes.

The stationary connection method is used in rare cases. The most the best option there was and remains a flexible hose.

So, regardless of which option for connecting to the water supply you choose, a number of conditions must be met:

The connection must be made when using ball valve. This is necessary so that the water supply can be stopped.
Before entering the washing machine, it is worth installing a small coarse filter. This will protect against problems with internal clogging.
Water connection is carried out using ready-made bends or using a tee from the main pipeline.

Sewage connection

Connection washing machine to the sewer system, at first glance, a simple and uncomplicated operation. However, this is not always the case. Everything will depend on the characteristics of the connection diagram. The procedure for connecting the water drain occurs in two ways:

Temporary connection.
Fixed connection.

In the first case, the drain hose is directed to the sink, toilet or bathtub. As for the second option, some difficulties may arise here.

The washing machine must be connected to the sewer:

taking into account the length of the drain hose. It shouldn't be too big. If you independently increase the length of the hose, the load on the pump automatically increases, which will result in premature wear;
through a siphon. As a result, the machine will be protected from unpleasant odors from the sewer system. You can also place the hose in a deliberate position to form a water seal. There must be at least 500 mm from the floor level to the bend point of the hose.

To connect the hose to the sewer, you will need a special rubber transition from a smaller to a larger diameter. As a result, the connection will be airtight.

Electrical network

Connecting the washing machine yourself to electrical network must be carried out in compliance with electrical safety requirements. A washing machine in most cases has a high power consumption of 1.5-2.5 kW. Moreover, the machine is constantly in contact with water.

To connect correctly, you must adhere to the following recommendations:

Take care of a separate power line. To implement this condition, you will need to lay a separate line from the distribution panel to the unit. If this procedure is performed after completion of the repair, use special plastic boxes. They will not spoil the appearance.
Engage special means protection from electricity. Like any other household appliance, the washing machine must be connected through a protective device. You can use a circuit breaker for this. You can install a residual current device (RCD) in the distribution panel; it will protect against possible power surges, as well as protect against electricity leakage.
Use electrical circuits, which will be suitable for operational and technical specifications. In particular, it is recommended to use wires with three cores and a cross-sectional area of 1.5 mm 2.

Connection of sockets is carried out according to the diagram. Protective grounding must be present. The grounding wire must be connected directly to the grounding bus, which is located in the panel.

It is not allowed to connect a grounded wire to a water or heat meter. Whenever emergency situation these devices may malfunction.

Regarding the choice of sockets, from a safety point of view ideal option is a socket with spring-loaded contacts. By following all these recommendations, you will save yourself from the need to use extension cords, because in this case the contacts may heat up, which will cause damage to the unit. It is also not recommended to install the outlet in a damp room. Therefore, it may be better if the socket for the washing machine is installed in an adjacent room.

Check and launch

When all installation procedures have been completed, you can perform the first test run. To do this, open the shut-off valve for the water supply, connect the machine to the power supply and check for drainage into the sewer. During the watering and draining process, make sure that there are no leaks or other errors.

If the wash cycle is completed successfully, it means that the washing machine is ready for further use.

Video

To connect a washing machine safely, you need: a minimum of certain knowledge and skills, the presence of an appropriate wire and protective devices. Correct connection guarantees the safe operation of equipment, but above all the safety of people.

Connection nuances

To connect the washing machine to the electrical network with your own hands, if the electrical wiring in the apartment is old (aluminum), you need a separate line made of copper wire with three cores, a cross-section of 2.5 mm 2, with a separate circuit breaker and an RCD. The best option NYM brand cable will be used. It is distinguished by triple insulation and sufficient rigidity, convenient for wiring in grooves.

Connecting wires in a modern electrical plug washing machine implies the presence of a grounding wire, it is usually two-color, yellow-green, connected to a separate screw inside the plug, it should not touch the “phase” and “zero”.

The washing machine is plugged into a special waterproof outlet. Waterproof sockets have several indices characterizing the degree of protection, there are 8 of them, the higher the index, the higher the protection. The socket is connected in the electrical panel to a separate circuit breaker with an operating rated current of 25 A.

Connection in the electrical panel is carried out as follows:

The blue wire is connected to the zero bus.
Grounding green-yellow wire to a free-standing screw on the metal panel body.
Phase wire to a separate circuit breaker or RCD.

Danger of connecting to the electrical network

If the washing machine is installed in the bathroom, there is a danger of injury to people taking a shower while the machine is running. This is due to the lack of necessary security measures.

Important: Lack of grounding and possible malfunctions, when the machine is running, and touching it while taking a shower will result in an impact electric shock.

Connection via RCD

Modern washing machines with a power of up to 2.2 kW or more require connection to the electrical network from an RCD, which ensures the safety of people from electric shock. The RCD is selected depending on the power consumption and can be: 16A, 25A or 32A, with a leakage current of 10 mA - 30 mA.

An alternative would be to connect the washing machine from a circuit breaker with differential protection; it is selected in the same way as selecting an RCD.

There are two ways to connect the washing machine from the mains:

To the general RCD of the apartment. In this case, due to the large total load, if the washing machine is damaged, there will be a strong current leak, there will be a strong electric shock, and as a result, there will be a power outage in the entire apartment.
From a separate RCD. In this case, in the event of a malfunction, only the washing machine will be turned off.

Connecting a washing machine without grounding

In the absence of residential grounding, it is highly undesirable to connect the grounding wire to the working neutral wire. Most Russian apartments do not have separate grounding, so in this case the connection can be made through an RCD or a difavtomat.

Advice: To avoid tingling by electric current and false triggering of the RCD, it is advisable to disconnect the grounding of the surge protector capacitors; the grounding is located next to the input of the power cable, inside the machine body. The filter is designed to protect against asynchronous frequency interference; when it occurs, the insulation can be damaged, which happens extremely rarely in 1 case in a million, and getting an electric shock is real.

Important: It is necessary to remember that if you want to protect yourself by independently connecting the protective grounding to an electrical panel that is not equipped with a special protective grounding bus, located on the floor in the entrance, the neutral wire may burn out. This is extremely dangerous and may cause electric shock to people.

Connecting an automatic washing machine is quite simple with a minimal set of tools: a fusible tape and two wrenches (or adjustable wrenches). The main communications that will be required are drainage, cold water pipeline and electricity. Next, we will look in detail at how to connect a washing machine to the water supply, sewerage and electrical networks with your own hands!

Necessary materials

Before you decide to install a washing machine, we recommend purchasing the following materials:

Preparatory work

If you are just planning to purchase this type of equipment and simply decided to familiarize yourself with the connection information in advance, we recommend that you view the detailed instructions for your home. When the purchased equipment is already in the house, you need to choose the most suitable installation location.

A modern solution would be to install a washing machine in the following places:

Under the sink in the bathroom. This way you can save space if there is little space in the bathroom.
In a kitchen set (built-in option under the countertop). Again, suitable if the bathroom is too small.
In the hall. It is recommended to install a washing machine in this place if all necessary communications are connected through the wall in the room.

Having decided on the installation location of the washing machine, you need to prepare the surface and print the equipment. Next, the shipping bolts are removed from the back cover to prevent rotation of the drum during its transportation from the store to the house. In addition to the bolts, there may also be protective bars and brackets installed that need to be removed.

If you do not remove all shipping parts and turn on the connected machine, it will very quickly fail, resulting in serious damage to the internal mechanism.

Don’t forget to plug the holes from the unscrewed bolts with the special plastic plugs included in the kit. After this, you need to unscrew the legs to place the body in a strictly horizontal position. Everything is simple here, loosen the nut that presses the leg to the body, then unscrew the leg to the required distance and tighten the upper nut until it stops. When the equipment is installed in its place, you need to move on to the main process.

You might also be interested in reading about. We have provided installation instructions in a separate article!

We supply cold water

First, you need to carry out the most labor-intensive task - connecting the washing machine to the water supply.

To make it more clear to you, we provide step by step instructions connecting the washing machine to cold water:

Select the connection location. It's best to use the area where the metal-plastic pipe connects to the flexible faucet hose, although you can even connect to a shower faucet.
Unscrew the flexible hose.
We install the tee, having previously wound the fume tape onto the thread.
Again, having wound the fume tape around the remaining two threads of the tee, you need to connect flexible hoses from the washbasin mixer and the washing machine itself.
We carefully tighten everything threaded connections key

Be sure to check that there are O-rings at both ends of the inlet hose to prevent water leakage at the connections!

We bring the drain

Everything is much simpler here and the connection process itself takes no more than 5 minutes.

First, you need to install a siphon under the sink, which will prevent the spread of unpleasant odors from the sewer. Next, you need to connect the drain hose to a special hole in the rear cover of the unit. Closer to the top of the back cover you will see a special plastic bracket for fixing the drain hose. If it is not secured, water will flow out of the unit by gravity. We connect the second end of the hose to the siphon (as shown in the photo), after which we check the connection points of the washing machine to the drain.

You can make a temporary drain by placing the outlet in the sink, toilet or bathtub, securing it to a special bracket included in the kit. We highly recommend not using this option as a stationary one, because... this will cause a lot of inconvenience in using the bathroom.

Connect to the power supply

Everything here can be quite simple only if your home electrical wiring is suitable for using such powerful household appliances.

You just need to plug the washing machine into a power outlet in the following cases:

you independently calculated the electrical wiring and made sure that the input cable can withstand the required loads;
wiring in a private house has (which is mandatory);
The socket group in the bathroom is protected by a circuit breaker or.

An important requirement is that in an old house it is necessary to replace the wiring, add protective devices to the circuit and be sure to make a grounding contact.

The diagram for correctly connecting a washing machine to the network looks like this:

As you can see, the electrical circuits are quite simple and even an electrician can figure out the connections. This is the whole technology for installing a washing machine with your own hands. We also recommend watching a visual video lesson of the entire event and several useful tips provided below.

Visual video instructions

There are many options for how to connect a washing machine to the water supply, sewerage and electrical networks. Some of them are not correct and can shorten the life of the equipment and negatively affect your health. To prevent this from happening, we provide readers of “” with some important tips:

Under no circumstances connect the grounding contact to radiators or gas and water supply lines.
Instead of fulenta, you can also use flax and paste, which are no less effective at blocking leakage.
Few people know, but an automatic washing machine can be connected not only to the central water supply, but also to an ordinary barrel of water. All you need to do is place the tank at least 4 meters above the equipment itself. A distance of 1 meter will give a pressure of 0.1 atmosphere, while 0.4 atmosphere will be enough for the machine to operate even without a pump. This idea is often used in villages at the dacha, where the water supply is unstable or there is no running water at all (a well or a borehole).
Align the building to building level. The slightest misalignment will cause vibration.
Do not place pieces of rubber or linoleum under the feet. You only need to adjust the height by unscrewing/twisting them. Substrates will also negatively affect the vibration of equipment during centrifuge operation. Even if the floor is uneven, to prevent the washing machine from jumping, adjust the legs correctly.
Do not throw away the shipping bolts, as... they may come in handy in the future (for example, if you move and take all your equipment to a new place of residence).
When installing a temporary drain, keep in mind that the hose may fall out of the bathroom (which happens very often) and flood your neighbors. If even a short hose is not enough, it is better to go to a plumbing store for a new, longer one, and then correctly connect the washing machine to the water supply and drain.

That's all the technology for installing and connecting a washing machine with your own hands. We hope that the information was interesting and useful for you!

Related materials:

The washing machine can be considered one of the most important household appliances in every home. However, in order to start using it, the washing machine must be installed and connected. To do this, you can call a mechanic who will quickly carry out the installation, but to save money we recommend doing the work yourself, because it is neither complex nor long-lasting.

This matter must be approached responsibly, because... In this technique there is a high probability of electrical breakdowns and, one might say, is on the verge. Selection occurs high level capacitive currents and heat. Therefore, in addition to the correct connection to water supply and sewerage, it is necessary to take into account the electrical component of the process. Next, let's look at all the nuances accompanying this process.

Choosing a location

There are several common places where washing machines are installed:

In the toilet;
Bathroom or combined bathroom;
Kitchen;
Corridor.

The most problematic place for installing washing machines is the corridor, because... it often lacks communications. This will require additional gasketing, which is very problematic.

The toilets have the necessary networks, but typical high-rise buildings generally do not have the necessary dimensions for it to be installed there. Therefore, sometimes special structures are built to place it above the toilet. However, this is also a rather problematic option, because You need a very strong shelf and a machine with excellent shock absorbers.

Bathrooms and combined bathrooms are already different big amount places to properly install equipment. If space allows, you can mount it next to the washbasin. But in this case, it is necessary to select a special sink, in which the siphon is located behind.

Another option would be installation in the bathroom - between the end board and the wall. Finding the required dimensions will not be a problem now; the range is truly huge.

Placing in bathrooms or toilets in general has its drawbacks. Due to increased humidity, rust may appear on the housing. But this moment is at your discretion.

The last popular installation location is the kitchen. Most often it is built into kitchen sets, which are periodically decorated with doors.

In general, installing a washing machine yourself means choosing the right installation location. Here it is necessary to take into account the individual characteristics of the home and the tastes of the owners.

Familiarization with the passport and instructions

Before you start connecting the washing machine, you should study the operating instructions supplied with the equipment. It is necessary to find out whether there are any installation features. You should also strictly follow the installation steps - from unpacking to the first start-up.

Preparing for installation

After choosing a location and reading the instructions, you must begin preparing the equipment. First of all, it is necessary to remove the transport elements and fixing parts. Bolted, hardware or wood elements may be present. After the transport bolts are unscrewed, the tank will hang on the springs. This is normal operating condition. Before connecting the washing machine, the holes remaining after removing the fixing parts must be closed with plugs.

This procedure is mandatory and the first during installation. If you do not do this and turn it on, the equipment will fail. Each automatic machine has its own fixation features and number of bolts, but all information is present in the product passport. In addition, they can be observed visually on the back wall.

Let's begin to figure out how to properly connect a washing machine to the water supply. To begin with, let's say that it is connected only to the cold water supply pipeline. Afterwards, if necessary, it is heated by heating elements. However, some owners connect to hot water. In this way, certain energy savings are achieved. But this is very doubtful, because... a larger volume of hot water will be used, which, if there is a hot water meter, will be very noticeable for the budget. In addition, if you connect the machine to hot water, you risk ruining some types of laundry.

Let's move directly to the connection. The delivery set includes a rubber hose that is used to connect to the water supply. It is usually up to 80 cm long and is often missing. If necessary, you can buy a longer one. The flexible hose is ¾ inch in diameter.

To connect the washing machine to the water supply with your own hands, you must perform the following operations. Here we will consider a situation using one separate valve.

A thread is cut at the required point in the water supply system and a valve is installed using appropriate fasteners. It will be needed to shut off the water after each wash.
It is recommended to install a filter mesh in the line, which will prevent the ingress of fine particles inside the car. It needs to be cleaned from time to time.
The flexible hose is connected either to ready-made outlets from the flush cistern of a toilet or faucet, using tees for connection, or new connection points are created.
We connect everything using a relatively long hose so that it is sufficient for connection, but there are no kinks.

Water drain connection

To implement the next stage, you need to figure out how to connect the washing machine to the sewer. During installation, certain deviations from standards are allowed. For example, in the absence check valve The connection is carried out exactly according to the instructions with strict adherence to the specified level of location of the pipes. If the minimum level of the pipe is specified as 50 cm, it cannot be placed below this indicator.

Connecting if there are sink or bathtub siphons nearby will not cause problems. In this case, no alteration of the sewer system will be required. However, you will need to purchase an appropriate siphon that has an outlet for connecting the washing machine and replace the old one with it.

You can also connect directly. To do this you will need:

Replace the sewer tee going to the sink or sink;
Create a separate corresponding outlet for connection.

Connecting directly will require some modification of the sewer system, but after this the output will be reliable. However, one must take into account the fact that the diameters of the drain hoses of washing machines are an order of magnitude smaller than the sewer outlets. Therefore, to ensure tightness and prevent the penetration of unpleasant odors, appropriate rubber cuffs are used. They involve simply placing a hose in them.

There is also a temporary connection option. Drain hoses are lowered into bathtubs, toilets or sinks. This is very easy to do, but it risks the hose popping out and causing a flood.

Whatever method you choose, you should make sure that there are no kinks or laying in loops. Corrugated types of hoses are prone to blockages. Because of this, it is necessary to control the minimum bend radius.

Usually all information is contained in the connection instructions. Basically, the minimum bending radius is 0.5 m, and the maximum is 0.85. To control the position, there are plastic clamps that are put on the corrugation and held in the required position.

Connection to the power grid

Due to the high power of the heaters used, it is advisable to connect the connected machine via a separate power supply line. The circuit is simple - you supply the phase to the machine, then to the RCD, and then to the place where the socket is installed.

All manufacturers emphasize that sockets must have grounding connections. Only in this case does the factory warranty remain valid.

Circuit breakers are selected based on the current rating. The power of the washing machine should be divided by 220V and you will get the level of current consumption. However, most often a 16A machine will be sufficient.

The RCD is selected one range higher than the rating of the machine. If the machine is 16A, then the RCD should be 32.

It would be a good idea to take into account the cross-section of the wire used. Nowadays copper wires are used for wiring. Since the power of washing machines is very different, it is impossible to say unequivocally which wire will be better. But on average, for a machine with a power of up to 5.5 kW, a cross-section of 2.5 mm2 will be sufficient.

When choosing an outlet, you need to pay attention not only to the presence of grounding contacts. Its rated current must also be taken into account. It is indicated on the housing of the sockets. Based on the rated power of your device, you must also select an outlet. It's not worth taking risks and using smaller denominations.

Leveling

Let's consider how to install washing machines in a plane so that it does not jump and normal operating conditions are ensured. Adjustment is made using adjustable feet. The sequence is simple. The building level is placed on the machine cover. The height of the legs is adjusted until the ideal level is reached.

The same check should be carried out with application to the front part. After this, on the back wall and sides. Once the required position has been achieved in all planes, installation of the machine is completed.

After this, stability is checked by lightly pressing on the corners of the machine from above. If there are no deviations, then everything is fine, but if not, then the adjustment is repeated.

Figuring out how to install a washing machine is easy. Moreover, each product comes with an installation diagram. If you study it, you will not have problems solving the problem.

An automatic washing machine can be connected to a water supply or storage tank, depending on the availability of communications in the house. Thanks to the variety of options, installing an indispensable assistant is possible not only in a comfortable home, but also in the countryside. When choosing how to connect a washing machine with your own hands for comfortable supply and drainage of water, you can choose one of the options: directly to a faucet or water tank, to a sewer pipe or a siphon. Washing machine repair Kyiv is also a very pressing issue, because it is not so easy to entrust a machine to workers. Contact only professionals!

Preparing the machine for connection

Having purchased a washing machine, before starting installation, remove the shipping bolts from the body - they hold the drum during transportation. The number of bolts varies depending on the manufacturer and ranges from three to six. The exact figure is indicated in the instructions.

To unscrew the bolts, you will need a 10 to 14 size wrench or pliers. Bolt removal procedure:

Turn the washing machine with the back wall towards you.
Find in the instructions where the bolts are attached (most often there are two on top and two on the bottom, but there may be other combinations). The exception is for models with vertical loading - their fastenings can be located on the top wall.
Using a wrench, unscrew the bolts from the housing and install plastic plugs in the resulting holes. You can do without them - the plugs do not affect the quality of washing and are needed to give an aesthetic appearance.

Do not throw away the removed bolts, but put them in a bag and store them. When you need to transport the equipment to another place or in the event of a machine breakdown, they can be screwed in again.

Connection to water supply and sewerage

In a city apartment, the preferred option is to connect directly to the communications system - in this case, water enters the machine through a branch water pipe, and leaves through the sewer drain.

How to ensure water supply to the drum

An automatic machine can be connected to the water supply in two ways - directly, by cutting an adapter into the pipe, or by connecting the hose to the mixer. When connecting, pay attention to whether the device heats the water - if so, it is enough to connect it to the cold water supply pipe, and if not, you will have to connect the hoses to both pipes, for hot and cold water. And the second point - if in the house metal pipes, call a plumber who will help you install the adapter.

How to connect a washing machine to a water supply from a plastic pipe:

Turn off the water in the apartment. Open the taps to drain any remaining water from the pipes.
Determine the section of pipe you will cut. Use a grinder to cut it out.
Screw the connecting fittings onto the edges of the pipe, having previously wrapped them with FUM tape against the threads to ensure watertightness.
Screw in the tee, also using FUM tape. When buying it, pay attention to the location and pitch of the thread - if the fittings have an external one, then choose a tee with an internal one and vice versa. The same applies to the branch for connecting the hose. Typically, hoses are equipped with a ½-inch internal thread, which means the tee must have an external thread of the appropriate diameter.
Take the hose supplied with the machine and connect it to the device with the end bent at an angle of 90⁰. Install a filter element for coarse debris inside the hose in advance with the convex side facing the body.
Connect the other side to the tee by screwing it onto the thread and tightening it with a wrench.

Connection via mixer

How to connect automatic washing machine to the water supply through the mixer:

Buy a tee in the store with an additional tap on cold water and the main extension cord - for hot.
Turn off the water in the apartment and drain the remaining water by opening the taps.
Disconnect the mixer from the eccentric.
Install a gasket corresponding to the diameter into each tee outlet - they are usually supplied as a kit.
Wrap external threads with FUM tape.
Screw the tee so that the hose outlet is at the bottom. Next, screw the extension onto the hot water pipe.
Screw the faucet to the tee and extension. Do not overtighten the nuts to avoid damaging the gaskets.

The last connection method is simple, but not without its drawbacks. A screwed hose does not look aesthetically pleasing, and the distance from the wall to the tap increases. In a small bathroom, a precariously screwed structure is easy to touch.

How to organize the drainage of water into a sewer drain

During the washing process, the machine drains the water - an outlet hose is provided for this. It can be lowered into a sink or drain, but this method has disadvantages:

the hose may break off the sides under the pressure of water;
Do not use the bathroom while washing.

Therefore, most often the washing machine is connected through the sink siphon. To do this, purchase an element with a branch for the drain hose and replace it. Instructions for replacing the siphon:

Turn off the water in the apartment.
Unscrew the side clamp nut leading to the pipe.
Unscrew the top nut securing the siphon to the sink.
Remove the sealing gaskets and unscrew the nut holding the siphon counterclockwise.
In the new set of parts, find the drain grate with a bolt and a gasket under it. Install on top of the sink, pre-treating it with silicone sealant.
Find the bottom part of the drain with the rubber gasket and screw it onto the bolt of the drain cup from below.
Assemble the siphon from the remaining elements and screw it tightly to the sink from below.
Connect a corrugated pipe with a gasket to the drain socket.

When the siphon is connected, connect the corrugated drain hose of the machine to the branch. Make sure that the distance from the floor to the highest point of the hose is at least 70 cm.

In the instructions on how to connect a washing machine with your own hands, the connection to the drain pipe plays an important role:

Install an element with a branch onto the drain pipe.
Connect a check valve to the drain hose. This is necessary so that the water does not drain immediately after filling.
Install the other end of the check valve into the pipe branch.
Treat the joints with transparent silicone sealant.

If there is no check valve, you will have to install a corrugated hose so that its end is approximately 70 cm above the floor. Otherwise, the water will automatically drain immediately after the pump pumps it up.

Connecting a washing machine without running water

Connecting a washing machine in a country house without running water is possible in three ways:

adding water manually through the detergent compartment;
installation/simulation of a pumping station;
installing a water tank 10 meters above the device.

The first method does not require special skills for installation, but the washing process is quite labor-intensive, so it will not be considered.

Video: How to connect an automatic machine without running water

Installing the tank above the machine

In a two-story house, you can install a water tank on the second floor and connect it with a pipe system to the inlet hose of the washing machine. Disadvantages of the method:

the need to manually carry about 100 liters of water to the second floor for each wash;
The tank takes up a lot of space and must be located at a high height.

Step-by-step instructions on how to connect an automatic washing machine without running water:

Buy a tank with a volume no less than the amount of water consumed per wash.
Install it above an automatic washing machine.
At the bottom of the tank, weld a control valve that will shut off the water, and attach a flexible hose to it.
Stretch a flexible hose from the tank to the inlet hose of the machine and connect them with a fitting or threaded element.
When open control valve water will flow into the machine automatically.

Simulation of a pumping station

A pumping station costs 5-6 thousand rubles and requires professional installation. You can save money by installing an imitation station in your home. You will need:

water container with a volume of 40 to 150 l;
drainage or other country pump;
relay to turn on the pump;
union;
FUM tape;
adapters;
tees.

How to connect an automatic washing machine without running water, simulating the operation of a pumping station:

Connect three hoses to the tee - to the machine, to the pump and to the pressure switch.
Connect the elements by first wrapping the joints with FUM tape and installing gaskets if necessary. Use threaded connections - this way you can turn off the pump at any time and use it for other purposes.
The pressure switch has two electrical wires - connect one to the pump, leave the second free. You will later plug it into the mains.
Place the pump in a tank of water, turn on the power and run a test wash. Do not forget to first level the machine and check the tightness of the connections.

Operating principle of the “station”:

when the relay is closed, there is no water pressure;
to create pressure, the pump works;
after opening the valve in the machine, which is responsible for filling the tank with water, the relay switches and the pump pumps water into the system;
When the drum is filled enough for one wash cycle, the valve closes and the relay switches back, signaling the pump to turn off.

Economical option without relay

You can do without a relay, as it is an expensive unit. To connect the pump directly to the machine and force it to turn on the device, follow the instructions:

Lay the case horizontally and at the bottom, find a block with wires of different colors.
Find the wires responsible for the operation of the inlet valve (responsible for filling with water).
Locate the location where the water supply hose enters. The inlet valve is located inside the housing at this location. There are two wires going to it, usually white.
Strip the insulation of each wire and solder the wires from the pump to them with an offset of approximately 1 cm.
Carefully insulate the contact points with electrical tape.

Now when the inlet valve is activated, the pump will automatically supply water to the tank. The main thing is to ensure that the container is full and the pump is completely immersed inside. The disadvantage of this connection is the inability to disconnect the pump when needed, for example, to water the garden.

Another option is to install reed switches instead of relays - contacts sealed in glass flasks that will respond to changes in the magnetic field when the inlet valve opens and transmit a signal to the machine pump.

For proper washing, the machine must be installed so that the top edge is level. You can level the height of the corners after you have completed connecting the washing machine, using the instructions for adjusting the legs:

Place a level on the top panel of the machine and determine which corners need to be raised.
Take the key included in the kit.
Loosen the nut at the leg that needs to be turned.
Unscrew the leg to the required length and tighten the nut again.
Check the level to see if the angle has risen.
Repeat with each leg until the machine is level. The maximum permissible deviation is 2 degrees.